Spaceway
Call us on freephone
0800 085 1022
"Installing Mezzanine, Office & Storage Solutions since 1976"
HomeProductsServicesDesign & InstallationShowroomsCase StudiesAbout UsContact Us  Quick Enquiry
Case Studies
Standards
Alitex
Mezzanine Floor
Petersfield
Hampshire
Standards
Cooper Vision
Warehouse Fit-Out
Fareham
Hampshire

Building Regulations ‘Part M’ Compliant Stairs

A Part M ‘ambulant disabled staircase’ will have the following characteristics.

The rise of each step is between 150 - 170mm, and the going at least 250mm.

A maximum of 12 risers before a landing are required (up to 16 in small premises where space is restricted).

Materials for treads should not present a slip hazard, especially when wet.

Tread nosings should be highlighted w

Clear tread width should not be less than 1200mm and the landings at least 1200mm long.

The overlap of treads should be no more than 25mm and avoided if possible. There is continuous handrail on each side of a flight and landings.

Handrail should extend safely at least 300mm horizontally beyond the top and bottom of a flight of steps

The vertical height to the top of the upper handrail from the pitch line of the flight of stairs is between 900mm and 1100mm, and from the surface of a landing is between 900mm and 1100mm.

Its surface is slip resistant and not cold to the touch.

Its profile is either circular with a diameter of between 40mm and 45mm, or oval preferably with a width of 50mm.

The clearance between the handrail and any adjacent wall surface is between 60 and 75 mm.
 

Gooch & Housego
Office Fit-Out
Ilminster
Somerset
Testimonials

CooperVision(UK)

Even before we went out to tender, Spaceway was willing to work with us on designs and respond quickly to our requests. Added to this Spaceway’s first rate reputation and competitive pricing ensured they were awarded the contract. The project was delivered on time and the quality of finish was absolutely first class. We are delighted with the finished job which meets all our requirements..

Andrew Hammond
European Projects Director

BS5454

What is BS5454?
  • BS5454 Storage and exhibition of Archival Documents is an advisory document. This guide attempts to help archivists understand what key points to consider when undertaking shelving and storage requirements within a BS5454 repository.
  • BS5454 does not examine every issue covered in the standard, and archivists are recommended to contact BSI direct if they wish to examine the complete standard.
  • It is advised that this document is used in conjunction with BS5454 and that archivists should contact our distributor for further information.
Why use BS5454?

  • It will aid the conservation of your archive material by making you aware of potential hazards to the collection.
  • When building an archive to BS5454 standards, it has been proved that early and comprehensive planning of your repository will considerably aid success.
  • Contact the experts and get specialist advice

More.......

   Your Name
  
   Company Name
  
   Email Address
  
   Phone Number
  
   Area of Interest
  Mezzanine Floors  
  Office Fit-Outs  
  Warehouse Fit-Outs  
  Racking & Shelving  
  Clean Rooms  
  Full Turnkey Package